Antique Encaustic Antique Terracotta
1M2 Plus 2M2 Plus 3M2 Plus All Batch Sizes
Grey/Black Blue/Green Red/Pink Yellow/Orange
Bathroom Kitchen Hallway Exterior
Floors Walls Splashback Hearth
Patterned Tiles Plain Tiles Square Tiles Hexagonal Tiles
Grey/Black Blue/Green Pink/Red Brown
This is a computer generated replication of only 4 tiles - whole foors/walls look more natural.
£30.00 – £130.00 +VAT
A natural finish water based impregnating sealer. Minimal change to surface character. Helps protect against staining. The treated surfaces strongly repel water, oil and grease. This product allows surfaces to breathe. Ideal for protecting porous surfaces that do not have a damp proof course. This product is non film forming. Suitable for polished and un-polished surfaces.
1 Litre, 5 Litre
There are no reviews yet.
Your e-mail address will not be published. Required fields are marked *
Your review *
• Non hazardous • High performance • Low odour VOC free • Non hazardous • High performance • Low odour VOC free
Low Porosity Surfaces: 1 Litre: 14 M2 Per Coat 5 Litre: 72 M2 Per Coat
Higher Porosity Surfaces: 1 Litre: 7.5 M2 Per Coat 5 Litre: 37.5 M2 Per Coat
Polished Surfaces: 1 Litre: 30M2 Per Coat 5 Litre: 150 M2 Per Coat
Ensure that any surfaces not to be treated are properly covered and protected before beginning. When spraying ensure that gloves and eye protection are worn at all times. Some areas may look patchy following application, especially if the sealer is applied to surfaces that are still slightly damp. This is caused by retained moisture. This is normal. The sealer is breathable, so any damp patches caused by retained moisture should still dry to leave surfaces with an even appearance. This can sometimes take a further couple of days following application. Do not cover newly sealed surfaces with non-breathable membrane, cardboard, plastic sheets. If necessary use breathable cotton dust sheets instead.